Cabletron Systems pmn manual Setting the Reset Peak Rate, Device Statistics Menu Screen

Chapter 5: Local Management

5.17.2 Setting the Reset Peak Rate

To reset the Peak Rate field to zero, proceed as follows:

1.Use the arrow keys to highlight the Reset Peak field for the selected port.

2.Press the SPACE bar to select YES.

3.Use the arrows keys to highlight the SAVE command at the bottom of the screen.

4.Press ENTER. The message “SAVED OK” displays and the Time Since Peak field is also reset.

5.18DEVICE STATISTICS MENU SCREEN

The Device Statistics Menu screen, Figure 5-23, provides access to screens that allow the user to obtain switch statistics about frame traffic through each interface and view operating statistics about each interface.

To access the Device Statistics Menu from the Device Menu screen, use the arrow keys to highlight the DEVICE STATISTICS menu item and press ENTER. The Device Statistics Menu screen displays.

NOTE

The Switch Statistics menu item will only display if the operational mode of the device has been set to 802.1D SWITCHING or 802.1Q SWITCHING. Refer to Section 5.7.9 for instructions on configuring the device to operate in this mode.

5-58 2M46-04R/2M46-04RDC User’s Guide