Cabletron Systems pmn manual Enabling/Disabling IP Fragmentation, Snmp Community Names Screen

SNMP Community Names Screen

5.7.12 Enabling/Disabling IP Fragmentation

To enable or disable IP fragmentation, proceed as follows:

1.Use the arrow keys to highlight the IP Fragmentation field.

2.Press the SPACE bar to choose either ENABLED or DISABLED.

3.Use the arrow keys to highlight the SAVE command.

4.Press ENTER. “SAVED OK” displays in the Event Message Line at the top of the screen.

If the 2M46-04R is being bridged to an FDDI ring via an

!optional HSIM-F6, IP Fragmentation should be enabled. If IP

CAUTION	Fragmentation is disabled, all FDDI frames that exceed the
	maximum Ethernet frame size will be discarded.

5.8SNMP COMMUNITY NAMES SCREEN

The SNMP Community Names option allows the user to set SNMP Management community names. Community names act as passwords to Local/Remote Management and are agents of security access to the 2M46-04R. Access to the 2M46-04R is controlled by enacting any of three different levels of security authorization (read-only, read-write, and super-user).

NOTE

Super-user access gives the user full management privileges, allows existing passwords to be changed, and all modifiable MIB objects for the Cabletron Container MIB and Internet MIB-II to be edited.

To access the SNMP Community Names screen from the Device Configuration Menu screen, use the arrow keys to highlight the SNMP COMMUNITY NAMES menu item and press ENTER. The SNMP Community Names screen displays.

2M46-04R/2M46-04RDC User’s Guide 5-29