Cabletron Systems pmn manual Snmp Traps Screen

Chapter 5: Local Management

5.9SNMP TRAPS SCREEN

Since the 2M46-04R is an SNMP compliant device, it can send messages to multiple Network Management Stations to alert users of status changes. The SNMP Traps screen is shown in Figure 5-14.

To access the SNMP Traps screen from the Device Configuration Menu screen, use the arrow keys to highlight the SNMP TRAPS menu item and press ENTER. The SNMP Traps screen displays.

Event Message Line

	2M46-04R LOCAL MANAGEMENT
	SNMP Traps
Device Type: 2M46-04R		Firmware Revision: XX.XX.XX
		BOOTPROM Revision: XX.XX.XX
Trap Destination	Trap Community Name	Enable Traps
	public	[NO]
0.0.0.0
0.0.0.0	public	[NO]
0.0.0.0	public	[NO]
0.0.0.0	public	[NO]
0.0.0.0	public	[NO]
0.0.0.0	public	[NO]
0.0.0.0	public	[NO]
0.0.0.0	public	[NO]
SAVE	EXIT	RETURN

2314-17

Figure 5-14 SNMP Traps Screen

The following explains each field of the SNMP Traps screen:

Trap Destination (Modifiable)

Indicates the IP address of the workstation to receive trap alarms. Up to eight different destinations can be defined.

Trap Community Name (Modifiable)

Displays the community name included in the trap message sent to the Network Management Station with the associated IP address.

Enable Traps (Toggle)

Enables transmission of the traps to the network management station with the associated IP address. This field toggles between YES and NO.

5-32 2M46-04R/2M46-04RDC User’s Guide