HP 7000 dl Router manual Server acct-port port number auth-port port number

SROS Command Line Interface Reference Guide Radius Group Command Set

server [acct-port <port number> auth-port <port number>]

Use the server command to add a pre-defined RADIUS server to the current named list of servers. See radius-serveron page 328 for more information.

Syntax Description

acct-port<port number> Define the accounting port value. auth-port<port number> Define the authorization port value.

Default Values

No defaults necessary for this command.

Command Modes

(config-sg-radius)# Radius Group Configuration

Usage Examples

The following example adds a server to the myServers list:

(config)#aaa group server radius myServers (config-sg-radius)#server 1.2.3.4 acct-port 786 auth-port 1812 (config-sg-radius)#server 4.3.2.1

(config-sg-radius)#exit(config)#

or

(config)#aaa group server radius myServers (config-sg-radius)#server 4.3.2.1 (config-sg-radius)#exit

(config)#

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 417