HP 7000 dl Router manual Area area id range ip address network mask advertise, Not-advertise

Router (OSPF) Configuration Command Set

area <area id> range <ip address> <network mask> [advertise

not-advertise]

Use this command to configure area route summarizations and to determine whether an address range is advertised to the networks.

Syntax Description

<area id>	Identifier for this area. Enter as an integer (range: 0-4294967295) or an IP
	address <A.B.C.D>.
<ip address>	The IP address of the advertised summary route.
<network mask>	The mask of the advertised summary route.
advertise	The specified address range will be advertised to other networks.
not-advertise	The specified address range will not be advertised to other networks.

Default Values

By default, OSPF is not enabled.

Command Modes

(config-ospf)# Router (OSPF) Configuration Mode required

Usage Examples

(config)#router ospf

(config-ospf)#area 11.0.0.0 range 11.0.0.0 255.0.0.0 advertise

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 905