HP 7000 dl Router manual Crypto map mapname

SROS Command Line Interface Reference Guide Ethernet Interface Configuration Command Set

crypto map <mapname>

Use the crypto map command to associate crypto maps with the interface.

When you apply a map to an interface, you are applying all crypto maps with the given map

Note name. This allows you to apply multiple crypto maps if you have created maps which share the same name but have different map index numbers.

Note	For VPN configuration example scripts, refer to the VPN Configuration Guide located on
	the ProCurve SROS Documentation CD provided with your unit.
Syntax Description
<mapname>	Enter the crypto map name that you wish to assign to the interface.

Default Values

By default, no crypto maps are assigned to an interface.

Command Modes

(config-interface)#	Interface Configuration Mode
	Valid interfaces include: Ethernet, virtual PPP interfaces (ppp 1), virtual Frame
	Relay sub-interfaces (fr 1.20), and loopback interfaces

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 442