HP 7000 dl Router manual Ip ospf authentication message-digest null

SROS Command Line Interface Reference Guide ATM Sub-Interface Config Command Set

ip ospf authentication [message-digest null]

Use the ip ospf authentication command to authenticate an interface that is performing OSPF authentication.

Syntax Description

message-digest	Select message-digest authentication type.
null	Select for no authentication to be used.

Default Values

By default, this is set to null (meaning no authentication is used).

Command Modes

(config-interface)#	Interface Configuration Mode
	Valid interfaces include: ATM sub-interface, Ethernet, virtual PPP interfaces,
	virtual Frame Relay sub-interfaces, and loopback interfaces

Usage Examples

The following example specifies that no authentication will be used on the ATM sub-interface 1.1:

(config-atm 1.1)#ip ospf authentication null

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 683