HP 7000 dl Router manual Range 0 to

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

Syntax Description (Continued)

<destination port>	Optional. Only valid when <protocol> is tcp or udp (See previously listed
	<source port> for more details)
<icmp-type>	Optional. Filter packets using ICMP defined (and numbered) messages carried
	in IP datagrams (used to send error and control information). Valid range is 0 to
	255.
<icmp-code>	Optional. ICMP packets that are filtered using the ICMP message type (using the
	<icmp-type>keyword) may also be filtered using the ICMP message code (valid
	range: 0 to 255).
	An <icmp-type>must be specified when entering an <icmp-code>.
<icmp-message>	Optional. Filter packets using ICMP descriptive message rather than the
	corresponding type and code associations.

Default Values

By default, all Secure Router OS security features are disabled and there are no configured access lists.

Command Modes

(config)# Global Configuration Mode

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 253