HP 7000 dl Router manual Copyright 2005 Hewlett-Packard Development Company, L.P 734

SROS Command Line Interface Reference Guide PPP Interface Configuration Command Set

backup auto-restore

Use the backup auto-restorecommand to configure the interface to automatically discontinue backup when all network conditions are operational. Use the no form of this command to disable the auto-restore feature. For more detailed information on PPP backup functionality, refer to the Functional Notes and Technology Review sections of the command.

Syntax Description

No subcommands.

Default Values

By default, all backup endpoints will automatically restore the primary connection when the failure condition clears.

Command Modes

(config-fr 1.16)#	Virtual Frame Relay Sub-Interface Configuration Mode
(config-ppp 1)#	PPP Interface Configuration Mode

Usage Examples

The following configures the Secure Router OS to automatically restore the primary connection when the failure condition clears:

(config)#interface ppp 1 (config-ppp 1)#backup auto-restore

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 734