HP 7000 dl Router Debug ip bgp events in out keepalives updates, In/out, Keepalives, Updates

SROS Command Line Interface Reference Guide Enable Mode Command Set

debug ip bgp [events in out keepalives updates]

Use the debug ip bgp command to activate debug messages associated with IP BGP. Debug messages are displayed (real time) on the terminal (or Telnet) screen. Use the no form of this command to disable the debug messages.

Syntax Description

events	Displays significant BGP events such as a neighbor state change.
in/out	Displays the same information as debug ip bgp, but limits messages to the
	specified direction (in or out).
keepalives	Displays BGP keepalive packets.
updates	Displays BGP updates for all neighbors.

Default Values

By default, all debug messages in the Secure Router OS are disabled.

Command Modes

# Enable Command Mode

Functional Notes

If no arguments are given, the debug ip bgp command displays general BGP events such as sent/received message summaries, route processing actions, and results. Keepalive packets are not debugged with this command.

Usage Examples

The following example enables debug messages on general outbound BGP messages and events:

#debug ip bgp out

#07:42:39: BGP OUT 10.15.240.1[2]: Transmitting msg, type=UPDATE (2), len=142

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 76