HP 7000 dl Router manual Show ip mroute group-addressinterface summary, #show ip mroute

SROS Command Line Interface Reference Guide Enable Mode Command Set

show ip mroute [<group-address><interface>] [summary]

Use the show ip mroute command to display IP multicasting routing table information.

Syntax Description

<group-address>	Optional. IP address of a multicast group.
<interface>	Optional. Designates the display of parameters for a specific interface (in the format
	type slot/port). For example: eth 0/1.
summary	Optional. Displays a single-line summary for each entry in the IP multicast routing
	table.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following is sample output from this command:

>enable

#show ip mroute

IP Multicast Routing Table

Timers: Uptime/Expires

(*, 239.2.170.3), 01:03:19/00:00:00 Incoming interface: Null, RPF nbr 0.0.0.0 Outgoing interface list:

fr 1.20, Forward, 01:03:19/00:01:48

(*, 224.1.1.1), 00:00:01/00:02:58, RP 0.0.0.0, flags: DCL

Incoming interface: Null, RPF nbr 0.0.0.0

Outgoing interface list: <-- because lo 100 ifc is joined Loopback100, Forward/Dense, 00:00:01/00:00:00

(*, 17.0.1.50), 00:00:01/00:02:58, RP 0.0.0.0, flags: DCL Incoming interface: Null, RPF nbr 0.0.0.0

Outgoing interface list:

Loopback100, Forward/Dense, 00:00:01/00:00:00

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 152