HP 7000 dl Router manual Show ip ospf, #show ip ospf

SROS Command Line Interface Reference Guide Enable Mode Command Set

show ip ospf

Use the show ip ospf command to display general information regarding OSPF processes.

Syntax Description

No subcommands.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following is a sample output from the show ip ospf command:

>enable

#show ip ospf

Summary of OSPF Process with ID: 192.2.72.101

Supports only single Type Of Service routes (TOS 0)

SPF delay timer: 5 seconds, Hold time between SPFs: 10 seconds

LSA interval: 240 seconds

Number of external LSAs: 0, Checksum Sum: 0x0

Number of areas: 0, normal: 0, stub: 0, NSSA: 0

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 153