SROS Command Line Interface Reference Guide

Enable Mode Command Set

 

 

clear arp-entry <address>

Use the clear arp-entrycommand to remove a single entry from the Address Resolution Protocol (ARP) cache.

Syntax Description

<address>

Specifies the IP address of the entry to remove

Default Values

No default value necessary for this command.

Command Modes

#

Enable Command Mode

Usage Examples

The following example removes the entry for 10.200.4.56 from the ARP cache:

>enable

#clear arp-entry 10.200.4.56

5991-2114

© Copyright 2005 Hewlett-Packard Development Company, L.P.

24

Page 24
Image 24
HP 7000 dl Router manual Clear arp-entry address, Enable #clear arp-entry