HP 7000 dl Router manual Shutdown, Config#interface serial 1/1 config-ser 1/1#shutdown

SROS Command Line Interface Reference Guide Serial Interface Configuration Command Set

shutdown

Use the shutdown command to disable the serial interface. Use the no form of this command to activate the serial interface.

Syntax Description

No subcommands.

Default Values

By default, the serial interface is shutdown.

Command Modes

(config-ser 1/1)# Serial Interface Configuration Mode

Functional Notes

While in shutdown, all data transmission ceases and all DTE leads become inactive.

Usage Examples

The following example disables the serial interface:

(config)#interface serial 1/1 (config-ser 1/1)#shutdown

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 501