HP 7000 dl Router manual Copyright 2005 Hewlett-Packard Development Company, L.P 604

SROS Command Line Interface Reference Guide Frame Relay Sub-Interface Config Command Set

backup auto-restore

Use the backup auto-restorecommand to configure the sub-interface to automatically discontinue backup when all network conditions are operational. Use the no form of this command to disable the auto-restore feature.

Syntax Description

No subcommands.

Default Values

By default, all backup endpoints will automatically restore the primary connection when the failure condition clears.

Command Modes

(config-fr 1.16)# Virtual Frame Relay Sub-Interface Configuration Mode required

Usage Examples

The following configures the Secure Router OS to automatically restore the primary connection when the failure condition clears:

(config)#interface frame-relay 1.16 (config-fr 1.16)#backup auto-restore

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 604