JVC HR-XVC33U manual C, B

Masterpage:Right-No-Heading
EN 55
Filename [XVC33U_08DVD.fm]
Page 55 22 July 2003 3:19 pm
Angle Selection
You can enjoy a variety of scene angles if the DVD VIDEO disc
contains “multi-angle” parts, where multiple cameras were used
to shoot the same scene from different angles.
If the disc contains “multi-angle” parts, “” appears on the TV
screen at the beginning of the “multi-angle” part when “ON
SCREEN GUIDE” is set to “ON”.
●During playback
When using the on-screen bar
AAccess the on-screen bar.
Press PLAY SETUP twice. The on-screen bar appears on
the TV screen.
BSelect menu item.
Press we to move 0 to , then press OK.
●The following pop-up window appears under the selected
item.
Example:The first view angle is selected out of 3 view angles
recorded.
CSelect the view angle.
Press rt repeatedly to select the desired view angle,
then press OK.
●Each time you press the button, the angle of the scene
changes.
To clear the on-screen bar
Press PLAY SETUP.
NOTE:
When “X” appears on the TV screen in stepC, the current
scene is not recorded from multiple angles.
When using the ANGLE button:
AAccess the menu.
Press ANGLE.
●The following pop-up window appears on the TV screen.
Example:The first view angle is selected out of 3 view angles
recorded.
BSelect the view angle.
Press rt or ANGLE repeatedly to select the desired
view angle, then press OK.
●Each time you press the button, the angle of the scene
changes.
●The pop-up window disappears if no operation is done for
about 5seconds.
Example:
1/3]2/3]3/3](Back to the beginning)
1
1
2
1
1
XVC33U_01.book Page 55 Tuesday, July 22, 2003 3:20 PM