JVC HR-XVC33U manual Enter the channel position, Engage the unit’s timer mode

EN 37

F Enter the channel position.

Press CH +/–.

G Set the tape speed.

Press SP/EP.

H Return to the normal screen.

Press PROG. or OK. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears. If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears on the TV screen, see page 40.

●Repeat steps B – H for each additional program.

I Engage the unit’s timer mode.

Press TIMER. The unit turns off automatically and “#” appears on the front display panel.

●To disengage the timer mode, press TIMER again.

To Timer-Record Weekly Or Daily Serials:

—anytime during steps C through G, press WEEKLY (number key “9”) for weekly serials or DAILY (number key “8”) for daily serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears on the TV screen. Pressing the button again makes the corresponding indication disappear.

NOTES:

●You can program this unit to timer-record as many as 8 programs. If you try to program the unit to record a ninth, “PROGRAM FULL” appears on the TV screen. To record the

extra program, you must first cancel any unnecessary programs. ( pg. 39)

●In case of a power failure after programing, the unit’s memory backup keeps your selections for approximately 5 seconds.

●Programs that start after midnight must have the next day’s date.

Cable Box or DBS Receiver Users

To timer-record a satellite broadcast using Express Timer Programing:

APerform steps A – I. Enter “F-1” for the channel position in step F.

BSet the DBS receiver to the appropriate channel before the selected program begins.

CLeave the DBS receiver’s power on.