JVC HR-XVC33U Are recorded to a disc, set MP3&WMA, Jpeg to MP3&WMA to play MP3/WMA, Files.  pg

			EN 87
2.	Not MP3/WMA files but JPEG files are	● The MP3&WMA/JPEG setting is set to	When both MP3/WMA files and JPEG files
	played.	“JPEG”.	are recorded to a disc, set “MP3&WMA/
			JPEG” to “MP3&WMA” to play MP3/WMA
			files. ( pg. 81)
3.	The MP3/WMA control display	● No MP3/WMA files or JPEG files are	Replace the disc. ( pg. 9)
	appears on the TV screen, but no	recorded to the disc, or the disc is an
	operation can be performed.	unplayable disc (such as CD-ROM).
JPEG Playback (DVD deck)
	SYMPTOM	POSSIBLE CAUSE	CORRECTIVE ACTION
1.	A disc cannot be played.	● No JPEG files are recorded to the disc.	Replace the disc.
		● JPEG files do not have the correct file	Add correct file extension (.jpg, .jpeg,
		extension in their file names.	.JPG, .JPEG or any uppercase and
			lowercase combination such as “.Jpg”) to
			their file names.
		● JPEG files are not recorded in a format	Replace the disc. (Record JPEG files using
		compliant with ISO 9660 Level 1 or 2.	a compliant application.)
2.	Not JPEG files but MP3/WMA files are	● The MP3&WMA/JPEG setting is set to	When both MP3/WMA files and JPEG files
	played back.	“MP3&WMA”.	are recorded to a disc, set “MP3&WMA/
			JPEG” to “JPEG” to play JPEG files.
			( pg. 81)
RECORDING (VCR deck)
	SYMPTOM	POSSIBLE CAUSE	CORRECTIVE ACTION
1.	Recording cannot be started.	● There is no cassette loaded, or the	Insert a cassette, or using adhesive tape,
		cassette loaded has had its record safety	cover the hole where the tab was
		tab removed.	removed.
2.	TV broadcasts cannot be recorded.	● “F-1” or “L-1” has been selected as the	Set to the desired channel.
		input mode.
3.	Tape-to-tape editing is not possible.	● The source (another video recorder,	Confirm that the source is properly
		camcorder) has not been properly	connected.
		connected.
		● All necessary power switches have not	Confirm that all units’ power switches are
		been turned on.	turned on.
		● The input mode is not correct.	Set the input mode to “F-1” or “L-1”.
4.	Camcorder recording is not possible.	● The camcorder has not been properly	Confirm that the camcorder is properly
		connected.	connected.
		● The input mode is not correct.	Set the input mode to “F-1” or “L-1”.
5.	“” and “$” on the front display	● The end of the tape was reached during	The program may not have been recorded
	panel won’t stop blinking.	recording.	in its entirety. Next time make sure you
			have enough time on the tape to record
			the entire program.