JVC HR-XVC33U manual Tape Remaining Time

34 ENOPERATIONS ON VCR DECK (cont.)

Elapsed Recording Time Indication

1 Set the counter display.

Press DISPLAY until a counter reading appears on the front display panel.

2 Reset the counter.

Press C.RESET before starting recording or playback.

● The counter is reset to “0:00:00” and shows the exact elapsed time as the tape runs. You can check the exact time of a recording or playback.

Tape Remaining Time

Press DISPLAY until the time remaining on the tape appears.

● The front display panel shows the tape remaining time with “z” displayed.

● By pressing the DISPLAY button, you can change display to show the clock time, counter reading or tape remaining time.

NOTES:

● When you press DISPLAY, the on-screen display appears on the TV screen for 5 seconds, then the displays other than the counter disappears. To clear the counter display, press

DISPLAY.

● Depending on the type of tape being used, the tape remaining time reading may not appear right away, or is not correct.

“– –:– –” may sometimes appear, or the display may blink on occasion.

Second Audio Recording

This unit’s built-in MTS decoder enables reception of Multichannel TV Sound broadcast. To record a SAP program received, set “2ND AUDIO RECORD” to “ON”. ( pg. 78)

NOTE:

When the channel is changed on the unit;

● The “STEREO” indicator appears on the screen for about 5 seconds if the program is a stereo broadcast.

● The “SAP” indicator appears on the screen for about 5 seconds if the program is a SAP broadcast.

● Both indicators appear when a stereo program is accompanied by SAP sound.