JVC HR-XVC33U manual 32 EN, Recording Resume Function

32 EN OPERATIONS ON VCR DECK (cont.)

Basic Recording

●Turn on the TV and select the VCR channel (or AV mode).

●Slide the TV/VCR/DVD switch to the right.

Recording Resume Function

If there is a power outage during recording, Instant Timer Recording or timer recording ( pg. 32, 33, 36), the recording will resume automatically when power is restored to the unit unless the unit’s memory backup has expired.

A Load a cassette.

Insert a cassette with the record safety tab intact.

●The unit’s power comes on automatically and the counter is reset to 0:00:00.

B Select the VCR deck.

On the unit

Press VCR/DVD repeatedly so that the VCR indicator lights up.

On the Remote

Press VCR so that the VCR indicator lights up.

C Choose a program.

Press CH +/– or the number keys to select the channel you wish to record.

D Set the tape speed.

Press SP/EP. The current setting appears on the front display panel or TV screen. Press SP/EP again to change the setting while the tape speed is displayed on the TV screen.

E Start recording.

Press and hold REC (7) and press PLAY (4) on the Remote, or press REC (7) on the unit.

Video Calibration takes place at the beginning of both the first SP and the first EP recording after inserting the cassette. ( pg. 35)

F Pause/Resume recording.

Press PAUSE (9). Press PLAY (4) to resume recording.

●You can select channel during the Record Pause mode.

G Stop recording.

Press STOP (8). Then press EJECT (x) on the VCR deck to remove the cassette.