JVC HR-XVC33U manual Resume Function, Zooming, Memorize the resume point, Resume playback

EN 45

Still Picture/Frame-By-Frame Playback

1Pause during playback.

Press PAUSE (9).

2Activate frame-by-frame playback.

Press PAUSE (9) to advance a still picture.

●To resume normal playback, press PLAY (4).

Slow Motion

During playback, press PAUSE (9), then press REW (3) for reverse slow motion playback, or FF (5) for forward slow motion playback.

●Each press of FF (5) changes the playback speed as follows: 1/32]1/16]1/4]1/2

●Each press of REW (3) changes the playback speed as follows (only for DVD VIDEO discs): –1/32]–1/16]–1/4]–1/2

●To resume normal playback, press PLAY (4).

NOTES:

●Reverse slow motion playback is possible only with the DVD VIDEO discs.

●This function may not works for some Video CD or SVCD.

Resume Function

It is possible to memorize the position where you stop playback and resume playback from that position.

●Be sure to set “RESUME” to “ON” or “DISC RESUME”. ( pg. 81)

1Memorize the resume point.

Press STOP (8) during playback.

●“RESUME STOP” appears on the front display panel.

●The unit enters Resume Stop mode and memorise the position where you stop playback as the resume point.

●The unit retains a memory of the resume points of the last 30

discs played back, even though they have been ejected if “RESUME” is set to “DISC RESUME”. ( pg. 81)

●To clear the resume point:

When “RESUME” is set to “ON”:

•Press STOP (8) in stop mode.

•Press POWER (1) to turn off the unit.

•Eject the disc.

When “RESUME” is set to “DISC RESUME”:

•Set “RESUME” to “OFF”. ( pg. 81)

•Press STOP (8) in stop mode.

2Resume playback.

Press PLAY (4). The unit start playback from the resume point.

●“RESUME PLAY” appears on the front display panel.

NOTES:

●Resume Function does not work on the Audio CD. It also may not work depending on the discs.

●If you stop the playback of a disc for which an resume point has already been memorized, the memory will be updated with the new resume point.

●After the unit has memorized the resume point for 30 discs, remembering a new resume point will cause the unit to delete the oldest memorized point. Stopping playback of a disc for which a resume point is already stored may change the order in which the points are stored. This may potentially change the order in which points are deleted.

●When the unit memorizes a resume point for a disc, it also remembers audio language, subtitle and angle settings.

●This function may not works for some Video CD or SVCD.

Zooming

Press ZOOM during playback or while paused.

●Each press of ZOOM changes the magnification as follows: 1.8x]4x]8x]16x]32x]64x

●When a 16:9 aspect picture source is displayed on a 4:3 aspect TV (conventional TV) in Letter Box conversion mode, the margins in black shown on top and bottom of the TV screen will be cropped by selecting 1.8x imagination. In such a case, note that both left and right side parts of the picture will also be cropped.

●While zoomed, the picture may look coarse or distorted.

Current magnification

Zoomed-in area

Press rt w e to move the zoomed-in scene.

●To resume normal playback, press OK.