Initial Configuration | Black Box Managed Gigabit Switch, LGB1126A

Chapter 1: Overview

1.1 Initial Configuration

This section details how to configure and manage the Gigabit Managed Switch through the Web user interface. This feature enables administrators to easily access and monitor the entire status of the switch through any one port of the switch. Statuses which may be monitored include status of the MIBs, activity of each port, status of spanning trees, port aggregation status, multicast traffic, VLAN and priority status, even illegal access records.

The default values of the Gigabit Managed Switch are listed in the table below:

	Table 1-1: Using Web-based management.
IP Address	192.168.1.1

Subnet Mask	255.255.255.0

Default	192.168.1.254

Username	admin

Password

After the Gigabit Managed Switch has been configured in the interface, you can browse it. For instance, type http://192.168.1.1 in the address row in a browser. You will see the screen in Figure 1-1, requesting your username and password to log in and authenticate your access.

Figure 1-1. The login screen.

The default username is “admin” and password is empty. For the first use, please enter the default username and password, then click the <Login> button.

Page 10	724-746-5500 blackbox.com	LGB1108A
		LGB1108A

Black Box Managed Gigabit Switch, LGB1126A, LGB1148A, LGB1108A manual Initial Configuration

Models: LGB1108A Managed Gigabit Switch LGB1126A LGB1148A

Chapter 1: Overview

1.1 Initial Configuration

Figure 1-1. The login screen.

The default username is “admin” and password is empty. For the first use, please enter the default username and password, then click the <Login> button.