Chapter 2: System Configuration

2.1.2 Configuration

You can identify the system by configuring the contact information, name, and location of the switch.

Web Interface

To configure System Information in the Web interface:

1.Click System, System Information, Configuration.

2.Write System Contact, System Name, System Location information in this page.

3.Click Save.

Figure 2-2. System Information Configuration screen.

Parameter Description

System Contact: The textual identification of the contact person for this managed node, together with information on how to contact this person. The string length should be 0 to 255 characters, and the type of content permitted is the ASCII characters from 32 to 126.

System Name: An administratively assigned name for this managed node. By convention, this is the node’s fully qualified domain name. A domain name is a text string drawn from letters (A-Z, a-z), numbers (0-9), and the minus sign (-). No space characters are permitted as part of a name. The first character must be an alpha character. And the first or last character must not be a minus sign. The string length should be 0 to 255.

System Location: Describes the physical location of this node (e.g., telephone closet, 3rd floor). The string length should be 0 to 255 characters, and the content should be ASCII characters from 32 to 126.

LGB1108A

724-746-5500 blackbox.com

Page 17

 

 

Page 17
Image 17
Black Box LGB1148A, LGB1126A, Managed Gigabit Switch, LGB1108A manual System Configuration