
Chapter 3: Configuration
Figure 3-33. The MLD Snooping Basic Configuration screen.
Parameter Description
•Snooping Enabled: Enables the Global MLD Snooping.
•Unregistered IPMCv6 Flooding Enabled: Enable unregistered IPMCv6 traffic flooding. Please note that disabling unregistered IPMCv6 traffic flooding may lead to failure of Neighbor Discovery.
•MLD SSM Range: SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers run the SSM service model for the groups in the address (Using IPv6 Address) range.
•Proxy Enabled: Enable MLD Proxy. This feature can be used to avoid forwarding unnecessary join and leave messages to the router side.
•Port: The Port index what you enable or disable the MLD Snooping function.
•Router Port: Specify which ports act as router ports. A router port is a port on the Ethernet switch that leads towards the Layer 3 multicast device or MLD querier. If an aggregation member port is selected as a router port, the whole aggregation will act as a router port.
•Fast Leave: To evoke to enable the fast leave on the port.
•Throttling: Enable to limit the number of multicast groups to which a switch port can belong.
•Buttons:
-Save: Click to save changes.
-Reset: Click to undo any changes made locally and revert to previously saved values.
Page 82 | LGB1108A | |
|
|