Black Box LGB1126A, LGB1148A, Managed Gigabit Switch, LGB1108A manual System Configuration

Chapter 2: System Configuration

•Contact: Enter the contact person’s name and phone here. You can configure this parameter through the device’s user inter- face or SNMP.

•Device Name: The name of the switch. User-defined.

•System Date: Show the system time of the switch. Its format: day of week, month, day, hours : minutes : seconds, year.

•System Uptime: The time accumulated since this switch is powered up. Its format is day, hour, minute, second.

•BIOS Version: The version of the BIOS in this switch.

•Firmware Version: The firmware version in this switch.

•Hardware-Mechanical Version: The figure before the hyphen is the version of electronic hardware; the one after the hyphen is the mechanical version.

•Serial Number: The serial number is assigned by the manufacturer.

•Host IP Address: The IP address of the switch.

•Host MAC Address: It is the Ethernet MAC address of the management agent in this switch.

•Device Port: Show all types and numbers of the port in the switch.

•RAM Size: The size of the RAM in this switch.

•Flash Size: The size of the flash memory in this switch.

•Bridge FDB Size: Displays the bridge FDB size information.

•Transmit Queue : Displays the device’s transmit hardware priority queue information.

•Maximum Frame Size: Displays the device’s maximum frame size information.

Page 16 724-746-5500 blackbox.com LGB1108A