
Chapter 4: Security
-Disabled: The server is disabled.
-Not Ready: The server is enabled, but IP communication is not yet up and running.
-Ready: The server is enabled, IP communication is up and running, and the RADIUS module is ready to accept accounting attempts.
-Dead (X seconds left): Accounting attempts were made to this server, but it did not reply within the configured timeout. The server has temporarily been disabled, but will get reenabled when the
•
•Icon, upper right of screen (Refresh): Click to refresh the RADIUS Status information manually.
4.6.3 RADIUS Details
This section shows you a detailed statistics of the RADIUS Authentication and Accounting servers. The statistics map closely to those specified in RFC4668 - RADIUS Authentication Client MIB.
Web Interface
To configure a RADIUS Details Configuration in the Web interface:
1.Specify which port you want to check.
2.Check
Figure 4-20. The RADIUS Authentication Statistics for Server screen.
Parameter Description
•Auto-refresh: Check the auto-refresh box to set the unit to refresh information automatically.
•Icons, upper right of screen (Refresh, Clear): Click to refresh the RADIUS Statistics information manually; click Clear to clear all new entries.
Page 190 | LGB1108A | |
|
|