Chapter 3: Configuration

3.15 Thermal Protection

This section describes how to inspect and configure current settings for controlling thermal protection. Thermal protection is used to protect the chip from becoming overheated.

3.15.1 Configuration

When the temperature exceeds the configured thermal protection temperature, ports will be turned off to decrease the power consumption. It is possible to arrange the ports with different priorities. Each priority can be given a temperature at which the corresponding ports will be turned off.

Web Interface

To configure the Thermal Protection in the Web interface:

1.Click Configuration, Thermal Protection, Configuration.

2.Specify the temperature in the priority 0 to 3.

3.Scroll to set the Priority.

4.Click the Save button to save the setting.

5.To cancel the setting, click the Reset button to revert to previously saved values.

Figure 3-82. The Thermal Protection Configuration screen.

Parameter Description

Temperature settings for priority groups

The temperature at which the ports with the corresponding priority will be turned off.

Priority: The criteria index for thermal protect trigger temperature, indexed from 0 to 3.

Temperature: To set the temperature criterion to trigger the thermal protect.

LGB1108A

724-746-5500 blackbox.com

Page 151

 

 

Page 151
Image 151
Black Box LGB1108A, LGB1126A, LGB1148A, Managed Gigabit Switch manual Thermal Protection