Chapter 3: Configuration
Parameter Description
•Delete: To delete a MAC-based VLAN entry, check this box and press Save. The entry will be deleted on the selected switch.
•MAC Address: Indicates the MAC address.
•VLAN ID: Indicates the VLAN ID.
•Port Members: A row of checkboxes for each port is displayed for each MAC-based VLAN entry. To include a port in a MAC- based VLAN, check the box. To remove or exclude the port from the MAC-based VLAN, make sure the box is unchecked. By default, no ports are members, and all boxes are unchecked.
•Adding a New MAC-based VLAN: Click to add a new MAC-based VLAN entry. An empty row is added to the table, and the MAC-based VLAN entry can be configured as needed. Any unicast MAC address can be configured for the MAC-based VLAN entry. No broadcast or multicast MAC addresses are allowed. Legal values for a VLAN ID are 1 through 4095.
The MAC-based VLAN entry is enabled on the selected switch unit when you click on “Save.“ A MAC-based VLAN without any port members on any unit will be deleted when you click “Save.“ The buttons can be used to undo the addition of new MAC- based VLANs.
•Buttons:
-Save: Click to save changes.
-Reset: Click to undo any changes made locally and revert to previously saved values.
Page 118 | 724-746-5500 blackbox.com | LGB1108A |
| |
