Chapter 3: Configuration
•Read View Name: The name of the MIB view defining the MIB objects for which this request may request the current values. The string length should be 1 to 32 characters, using ASCII characters from 33 to 126.
•Write View Name: The name of the MIB view defining the MIB objects for which this request may potentially set new values. The string length should be 1 to 32 characters, using ASCII characters from 33 to 126.
.
2.6.7 Trap
The function is used to configure SNMP trap. To create a new trap account, check <No number> button, and enter the trap infor- mation then check <Apply>. Max Group Number : 6.
Web Interface
To configure SNMP Trap setting:
1.Click SNMP, Trap.
2.Display the SNMP Trap Hosts information table.
3.Choose an entry to display and modify the detail parameters or click the Delete button to delete the trap hosts entry.
Figure 2-19. The SNMP Trap Host Configuration screen.
Parameters description:
•Delete: Check <Delete> entry then check <Save> button, the entry will be deleted.
•Trap Version: You may choose v1, v2c or v3 trap.
•Server IP: To assign the SNMP Host IP address.
Page 38 | LGB1108A | |
|
|
