
Chapter 3: Configuration
3.2.2 Rate Limiters
This section describes how to configure the switch’s ACL Rate Limiter parameters. The Rate Limiter Levels from 1 to 16 permit the user to set rate limiter value and units with pps or kbps.
Web Interface
To configure ACL Rate Limiter in the Web interface:
1.Click Configuration, ACL, then Rate Limiter
2.To specific the Rate field and the range from 0 to 3276700.
3.To scroll the Unit with pps or kbps
4.Click the Save button to save the setting
5.If you want to cancel a setting, click the Reset button to revert to previously saved values.
Figure 3-9. The ACL Rate Limiter Configuration screen.
Parameter Description
•Rate Limiter ID: The rate limiter ID for the settings contained in the same row.
•Rate: Permitted values are: 0–3,276,700 in pps or 0, 100, 200, 300, ..., 1,000,000 in kbps.
•Unit: Specify the rate unit. Values permitted are: pps (packets per second) and kbps (kilobits per second).
•Buttons:
-Save: Click to save changes.
-Reset: Click to undo any changes made locally and revert to previously saved values.
Page 52 | LGB1108A | |
|
|