Chapter 3: Configuration
3.6.4 Status
This section describes how to display the MLD Snooping Status.
Web Interface
To display the MLD Snooping Status in the Web interface:
1.Click Configuration, MLD Snooping, Status
2.If you want to
3.Click “Refresh“ to refresh the MLD Snooping Status information.
4.Click “Clear“ to clear the MLD Snooping Status window.
Parameter Description
•VLAN ID: The VLAN ID of the entry.
•Querier Version: The current working Querier Version.
•Host Version: The current working Host Version.
•Querier Status: Shows whether the Querier status is “ACTIVE“ or “IDLE“.
•Queries Transmitted: The number of Queries transmitted.
•Queries Received: The number of Queries received.
•V1 Reports Received: The number of V1 Reports received.
•V2 Reports Received: The number of V2 Reports received.
•V1 Leaves Received: The number of V1 Leaves received.
•
•Icons, upper right of screen (Refresh, <<, >> ): Click Refresh to refresh the MLD Group Status manually. Click the arrows to navigate to the next page or entry.
LGB1108A | Page 85 | |
|
|
