Black Box LGB1126A, LGB1148A, Managed Gigabit Switch, LGB1108A manual Configuration, Page

Chapter 3: Configuration

•Key: The Key value incurred by the port, range 1-65535. The Auto setting will set the key as appropriate by the physical link speed, 10Mb = 1, 100Mb = 2, 1Gb = 3. Using the Specific setting, a user-defined value can be entered. Ports with the same

Key value can participate in the same aggregation group, while ports with different keys cannot.

•Role: The Role shows the LACP activity status. The Active will transmit LACP packets each second, while Passive will wait for a LACP packet from a partner (speak if spoken to).

•Buttons:

-Save: Click to save changes.

-Reset: Click to undo any changes made locally and revert to previously saved values.

System Status

When you set the LACP function on the switch, it provides a status overview for all LACP instances

Web Interface

To display the LACP System status in the Web interface:

1.Click Configuration, LACP, System Status

2.To set the switch to auto-refresh the information, check “Auto-refresh”.

3.Click “ Refresh“ to refresh the LACP System Status.

Figure 3-14. The LACP System Status screen

Parameter Description

•Aggr ID: The Aggregation ID associated with this aggregation instance. For LLAG the ID is shown as 'isid:aggr-id' and for GLAGs as “aggr-id“.

•Partner System ID: The system ID (MAC address) of the aggregation partner.

•Partner Key: The key that the partner has assigned to this aggregation ID.

•Last Changed: The time since this aggregation changed.

•Local Ports: Shows which ports are a part of this aggregation for this switch. The format is: “Switch ID:Port.“

•Auto-refresh: Click auto-refresh to refresh the information automatically.

•Icon, upper right of screen (Refresh): Click to refresh the LACP System status information manually.

Page 60 724-746-5500 blackbox.com LGB1108A