Chapter 3: Configuration
3.8.6 Port Statistics
Two types of counters are shown. Global counters are counters that refer to the whole switch, while local counters refer to
Web Interface
To show LLDP Statistics:
1.Click LLDP, than click Port Statistics to show LLDP counters.
2.Click Refresh to see the manual update Web screen.
3.Click
4.Click Clear to clear all counters.
Figure 3-48: The LLDP Port Statistics Information screen.
Parameter Description:
Global Counters
•Neighbor entries were last changed at: Indicates the time when the last entry was last deleted or added. It also indicates the time elapsed since the last change was detected.
•Total Neighbors Entries Added: Shows the number of new entries added since switch reboot.
•Total Neighbors Entries Deleted: Shows the number of new entries deleted since switch reboot.
•Total Neighbors Entries Dropped: Shows the number of LLDP frames dropped because of the entry table being full.
•Total Neighbors Entries Aged Out: Shows the number of entries deleted because of Time-To-Live expiring.
Local Counters
The displayed table contains a row for each port. The columns hold the following information:
•Local Port: The port on which LLDP frames are received or transmitted.
•Tx Frames: The number of LLDP frames transmitted on the port.
•Rx Frames: The number of LLDP frames received on the port.
•Rx Errors: The number of received LLDP frames containing an error.
LGB1108A | Page 103 | |
|
|
