Black Box LGB1126A, LGB1148A, Managed Gigabit Switch, LGB1108A manual Configuration

Chapter 3: Configuration

3.9.2 Dynamic MAC Table

Entries in the MAC Table are shown on this page. The MAC Table contains up to 8192 entries and is sorted first by VLAN ID then by MAC address.

Web Interface

To Display MAC Address Table in the Web interface:

1.Click Dynamic MAC Table.

2.Specify the VLAN and MAC Address.

3.Display MAC Address Table.

Figure 3-50. The Dynamic MAC Address Table information screen.

Parameter Description

MAC Table Columns

•Type: Indicates whether the entry is a static or a dynamic entry.

•VLAN: The VLAN ID of the entry.

•MAC Address: The MAC address of the entry.

•Port Members: The ports that are members of the entry.

•Auto-refresh: Check the auto-refresh box to set the unit to refresh information automatically.

•Icons, upper right (Refresh, Clear, <<, >>): Click to refresh the MAC address manually. Press Clear to clear all new entries from the MAC table. Press << or >> to scroll to the next entry on the table.

NOTE the following MAC addresses:

00-40-C7-73-01-29: your switch MAC address (for IPv4).

33-33-00-00-00-01: Destination MAC (for IPv6 Router Advertisement) (reference IPv6 RA.JPG).

33-33-00-00-00-02: Destination MAC (for IPv6 Router Solicitation) (reference IPv6 RS.JPG).

33-33-FF-73-01-29: Destination MAC (for IPv6 Neighbor Solicitation) (reference IPv6 DAD.JPG).

33-33-FF-A8-01-01: your switch MAC address (for IPv6 global IP).

FF-FF-FF-FF-FF-FF: for Broadcast.

Page 108 724-746-5500 blackbox.com LGB1108A