Chapter 4: Security
4.2.2 Static Table
This section describes how to configure the Static ARP Inspection Table parameters of the switch. Web Interface
To configure a Static ARP Inspection Table Configuration in the Web interface:
1.Click “Add new entry”.
2.Specify the Port, VLAN ID, IP Address, and MAC address in the entry.
3.Click “Save.“
Figure 4-5. The Static ARP Inspection Table
Parameter Description
•Delete: Check to delete the entry. It will be deleted during the next save.
•Port: The logical port for the settings.
•VLAN ID: The VLAN ID for the settings.
•MAC Address: Allowed Source MAC address in ARP request packets.
•IP Address: Allowed Source IP address in ARP request packets.
•Adding new entry: Click to add a new entry to the Static ARP Inspection table. Specify the Port, VLAN ID, MAC address, and IP address for the new entry. Click “Save.“
•Buttons:
-Save: Click to save changes.
-Reset: Click to undo any changes made locally and revert to previously saved values.
Page 170 | LGB1108A | |
|
|
