Chapter 3: Configuration
Parameter Description
•Mode: Indicates the Voice VLAN mode operation. Disable the MSTP feature before enabling Voice VLAN to avoid the conflict of ingress filtering. Possible modes are:
Enabled: Enable Voice VLAN mode operation.
Disabled: Disable Voice VLAN mode operation.
•VLAN ID: Indicates the Voice VLAN ID. This should be a unique VLAN ID in the system and cannot equal each port PVID. It is a conflict in configuration if the value equals management VID, MVR VID, PVID etc. The valid range is 1 to 4095.
•Aging Time: Indicates the Voice VLAN secure learning aging time. The range is 10 to 10000000 seconds. It is used when security mode or auto detect mode is enabled. In other cases, it will be based on hardware aging time. The actual aging time will be situated between the [age_time; 2 * age_time] interval.
•Traffic Class: Indicates the Voice VLAN traffic class. All traffic on the Voice VLAN will apply to this class.
•Port Mode: Indicates the Voice VLAN port mode. When the port mode isn’t equally disabled, first disable MSTP feature before enabling Voice VLAN, to avoid the conflict of ingress filtering.
Possible port modes are:
Disabled: Disjoin from Voice VLAN.
Auto: Enable auto detect mode to detect whether there is a VoIP phone attached to the specific port. This mode configures the Voice VLAN members automatically.
Forced: Force join to Voice VLAN.
•Port Security: Indicates the Voice VLAN port security mode. When the function is enabled, all nontelephonic MAC addresses in the Voice VLAN will be blocked for 10 seconds. Possible port modes are:
Enabled: Enable Voice VLAN security mode operation.
Disabled: Disable Voice VLAN security mode operation.
•Port Discovery Protocol: Indicates the Voice VLAN port discovery protocol. It will only work when auto detect mode is enabled. Enable the LLDP feature before configuring discovery protocol to “LLDP“ or “Both.“ Changing the discovery protocol to “OUI“ or “LLDP“ will restart the autodetect process. Possible discovery protocols are:
OUI: Detect telephony device by OUI address.
LLDP: Detect telephony device by LLDP.
Both: Both OUI and LLDP.
•Buttons:
-Save: Click to save changes.
-Reset: Click to undo any changes made locally and revert to previously saved values.
Page 124 | LGB1108A | |
|
|
