Black Box Managed Gigabit Switch, LGB1126A, LGB1148A, LGB1108A manual Maintenance, Page

Chapter 5: Maintenance

5.5.2 Ping6

This section enables you to issue ICMPv6 PING packets to troubleshoot IPv6 connectivity issues.

Web Interface

To configure an ICMPv6 PING Configuration in the web interface:

1.Specify ICMPv6 PING IP Address.

2.Specify ICMPv6 PING Size.

3.Click “Start.“

Figure 5-11. The ICMPv6 Ping screen.

Parameter Description

•IP Address: The destination IP Address with IPv6.

•Ping Size: The payload size of the ICMP packet. Values range from 8 bytes to 1400 bytes.

•Start: Click the “Start” button. The switch will start to ping the device using the ICMPv6 packet size set in the “Ping Size“ entry that has been set.

After pressing “Start,” five ICMPv6 packets will be transmitted. The sequence number and roundtrip time are displayed upon reception of a reply. The page refreshes automatically until responses to all packets are received, or until a timeout occurs.

PING6 server 10.10.132.20

64 bytes from 10.10.132.20: icmp_seq=0, time=0ms

64 bytes from 10.10.132.20: icmp_seq=1, time=0ms

64 bytes from 10.10.132.20: icmp_seq=2, time=0ms

64 bytes from 10.10.132.20: icmp_seq=3, time=0ms

64 bytes from 10.10.132.20: icmp_seq=4, time=0ms

Sent 5 packets, received 5 OK, 0 bad

Page 210 724-746-5500 blackbox.com LGB1108A