Black Box LGB1108A, LGB1126A, LGB1148A manual Trap Event Severity, Configuration, Page

Chapter 3: Configuration

3.21 Trap Event Severity

This function is used to set a Alarm trap and get the Event log. The Trap Events Configuration function is used to enable the switch to send out the trap information while pre-defined trap events occurred.

Web Interface

To configure the Trap Event Severity Configuration in the Web interface:

1.Click Configuration, Trap Event Severity Configuration.

2.Scroll to select the Group name and Severity Level.

3.Click Save to save the setting.

4.To cancel any changes before saving, click the Reset button to revert to previously saved values.

Figure 3-92. The Trap Event Severity Configuration screen.

Parameter Description

•Group Name: The field describes the Trap Event definition.

•Severity Level: Select the event type with “Emerg“, “Alert“, “Crit“, “Error“, “Warming“, “Notice“, “Info“ and “Debug”.

•Buttons:

-Save: Click to save changes.

-Reset: Click to undo any changes made locally and revert to previously saved values.

LGB1108A 724-746-5500 blackbox.com Page 163