Black Box LGB1126A, LGB1148A, Managed Gigabit Switch, LGB1108A manual SMTP Configuration, Page

Chapter 3: Configuration

3.22 SMTP Configuration

When the switch perceives an alarm, use this function to enable the SMTP server to send you an alarm e-mail. Web Interface

To configure the SMTP Configuration in the Web interface:

1.Click Configuration, SMTP Configuration.

2.Scroll to select the Severity Level.

3.Specify the parameters in each blank field.

4.Click the Save button to save the setting.

5.Click Reset to undo any changes made locally and revert to previously saved values

Figure 3-93. The SMTP Configuration screen

Parameter Description

These parameters are displayed on the SMTP Configuration page:

•Mail Server: Specify the IP Address of the server transferring your e-mail.

•Username: Specify the username on the mail server.

•Password: Specify the password on the mail server.

•Sender: To set the mail sender name.

•Return-Path: To set the mail return-path as sender mail address.

•Email Address 1–6: Email address where you would like to receive the alarm message.

•Buttons:

-Save: Click to save changes.

-Reset: Click to undo any changes made locally and revert to previously saved values.

Page 164 724-746-5500 blackbox.com LGB1108A