Nikon manual Procedure 3-1 Configuring a 4300 Device Mesh

Chapter 3: Device Configuration

Procedure 3-1 Configuring a 4300 Device Mesh

1Ensure that all the 4300 devices are wire-connected to the MOTOMESH 2.0 MiSC. NOTE: It is recommended that the 4300 devices are set-up on the bench prior to actual deployment in the field.

2The MOTOMESH 2.0 MeshManager element management application must be installed and running.

3	From within MeshManager select the	Add MotoMesh Duo Device icon from the Toolbar menu, or
	select File Add MotoMesh Duo Device from the application menu.

4The Add New MOTOMESH Duo Device panel will now be shown in MeshManager.

Figure 3-1 The Add New MOTOMESH Duo Device Panel in MeshManager

5

Enter the 4300 Device’s 802.11 Ethernet MAC address, from the external device’s label, into the 802.11 AP Ethernet entry field.

Figure 3-2 Entering the 802.11 AP Ethernet MAC Address in MeshManager

July 2007

3-2