Nikon 4300 manual 11 Configuring a Device to be an IAP or WR, 12 Entering a Device Name

MOTOMESH DUO 2.0 4300 Users Guide

17

Decide if you want the device to be an IAP or an MWR on your network.

The Device is an IAP checkmark is ENABLED by Default. If you wish to Add a device to the Network as a MWR, simply uncheck the check box associated with this selection.

IMPORTANT NOTE: All MOTOMESH Duo 4300 devices are initially preconfigured as IAPs. If you wish to demote an IAP to a WR after it has been added to the Network, you can do so at a later time.

Figure 3-11 Configuring a Device to be an IAP or WR

18

Enter a device name into the Device Name entry field. Follow your company’s device network naming conventions.

IMPORTANT NOTE: No spaces are allowed when choosing a Device Name. Your entry must be a fully qualified Domain Name.

IMPORTANT NOTE: If a device name is not entered, MeshManager will generate a randomly unique name.

Figure 3-12 Entering a Device Name

July 2007

3-9