Nikon MOTOMESH Duo 4300 Device Specifications, 1 MOTOMESH Duo 4300-49 Device Specifications

Product Introduction

MOTOMESH Duo 4300 Device Specifications

The following specification tables apply to the MOTOMESH Duo 4300-49, 4300-58, and 4300-54 Infrastructure Devices.

Table 1-1 MOTOMESH Duo 4300-49 Device Specifications

Radio Characteristics

Primary Radio Operating Freq. (GHz)		2.400 to 2.483
Secondary Radio Operating Freq. (GHz)		4.940 to 4.990
Wi-Fi Support		802.11b/g at 2.4GHz; 802.11a at 4.9GHz
RF Modulation		CCK (802.11b) / OFDM (802.11a/g)
		2.4 GHz Portion	4.9 GHz Portion
Transmit Power (Maximum)		35 dBm EIRP	34 dBm EIRP
Receive Sensitivity		801.11b: -92 dBm (at 11 Mbps)	802.11a: -77 dBm (at 27 Mbps) to -93
		to -100 dBm (at 1 Mbps)	dBm (at 3 Mbps)
		801.11g: -78 dBm (at 54 Mbps)
		to -95 dBm (at 6 Mbps)
Power Control		1dB increments
Antenna Type		Two (2) omni directional, 8 dBi (for 2.4 GHz Radio) and 11 dBi (for 4.9
		GHz Radio)
Antenna Connector	N-Type
Routing
Routing Engine		MeshConnex™ Layer 2 routing with Layer 1 situational-awareness
Routing Protocol	Patented, hybrid proactive/reactive routing (low latency & fast route
		convergence)
IEEE 802.11s Support	Upgradeable to IEEE 802.11s standard via OTA software updates
Network
Network Management Software		MeshManager Element Management System via secure SNMP v.3
Network Interface		10/100Mbps Ethernet (RJ-45) port with surge suppression
		Multiple SSIDs with VLAN mapping
Network Segmentation
Quality of Service (QoS)		802.11e, EDCF, 802.11p and the IP precedence of DSCP (ToS) bits
Security
Virtual LAN (VLAN)		Supports up to sixteen (16) per node, or 4094 per network
Client Encryption Support	WEP, WPA (TKIP) and WPA2 (AES, 802.11i)
Internodal Encryption		Intra-Mesh Security
Authentication		802.1X (Infrastructure/Client) and MAC address hardware authentication

July 2007

1-4