Nikon 4300 Infrastructure Device Assembly, 5 External Personality Plugs Black, Grey, Red, or none

Chapter 2: Infrastructure Device Installation

Infrastructure Device Assembly

Figure 2-4 shows the external connection points for a MOTOMESH Duo 4300 device. The figure below it shows some examples of optional personality plugs (Black – Canopy Connect PoE, and Standards based 802.3 af PoE Grey). A red Hardware Reset Plug (not shown below) is also available and is used to reset a stranded 4300 device back to its factory default configuration.

Figure 2-4 Infrastructure Device Top View showing External Connection Points

N-Type Antenna			N-Type Antenna (5.8)
			N-Type Antenna (4.9,
(2.4)			5.4,Nor-Type5.8)Antenna (5.8)
Power ON
	A	B	Optional PoE feature port.
Indicator Light
Gore Vent
An optional External
Personality Plug are			Ethernet Port
connected here
ONLY if the
Standards based			Power
802.3af PoE or
Canopy PoE (option)
is purchased. If
neither PoE is		Device Hinges
purchased, the port
will be covered.

Figure 2-5 External Personality Plugs (Black, Grey, Red, or none)

NOTE: An optional red Hardware Reset Plug (not shown above) is used to reset a stranded 4300 device back to its factory default configuration. The plug looks similar to the other Personality Plugs shown above, but it is in red.

July 2007

2-6

Black plug for use with the Canopy Connect PoE option.

Grey plug for use with the Standards based 802.3af PoE option.