Chapter 3: Device Configuration

Chapter

3

Chapter 3: Device Configuration

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

.

.

.

This chapter includes the following sections:

-Pre-staging a MOTOMESH Duo 4300 device in MeshManager

-Demoting and Promoting an IAP

-Second IP Stack Aids in Troubleshooting

Pre-staging a MOTOMESH Duo 4300 Device in MeshManager

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

.

Default Device Configuration

The following is a description of default configurations for a Motorola 4300-54, and 4300-58 device:

-2.4 GHz radio is pre-configured (any other frequency is not automatically enabled, even if purchased.) The following sections will describe how to enable the additional radio and network mesh.

-Management VLAN is set at 4095

-VLAN Membership is set at 0-4095

Configuring a 4300 Device Mesh from 2.4 to 4.9, 5.4, or 5.8

The following procedure describes the necessary steps required to change an out-of-the-box device from an 802.11 b/g mesh to an 802.11 a mesh with the use of the MOTOMESH Duo 2.0 MeshManager element management system application (also known as DeviceManager) prior to field deployment.

July 2007

3-1

Page 31
Image 31
Nikon manual Pre-staging a MOTOMESH Duo 4300 Device in MeshManager, Default Device Configuration, Chapter