ASSEMBLY
Your new mower has been assembled at the factory with the exception of those parts left un- assembled for shipping purposes. To ensure safe and proper operation of your mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.
TOOLS REQUIRED
FOR ASSEMBLY
1.9/16" wrench or 9/16" socket w/ drive ratchet
2.Tire pressure gauge
3.Nail bar or claw hammer
4.Wire snips
When right or left hand is mentioned in this manual, it means when you are in the operating position (seated).
TO REMOVE THE MOWER
FROM CRATE
UNPACK CRATE
•Using the nail bar or hammer, remove the top of the crate first. Then remove the sides of the crate and place these out of the way. Be careful of any exposed nails or staples.
•Remove the plastic bag that covers the mower.
•Using the wire snips, cut any plastic ties that are holding the mower to the crate.
•Remove the seat off of the front of the mower and place in a safe location.
12
