ASSEMBLY

BEFORE REMOVING THE

MOWER FROM THE SKID

ATTACH SEAT (See Fig. 1)

The seat position should be adjusted forward or backward so that the operator can comfortably reach the deck lift pedal and safely operate the mower. See "Service and Adjustment" Section of this manual.

Remove protective wrap from the seat.

Remove the three prong knobs and washers from the seat and place in the storage area in the right side console.

Raise the seat pan up so that the bottom can be easily accessed.

Securing one of the three prong knobs and washers, insert it thru the seat pan slot and into the corresponding threaded hole in the seat bottom.

Repeat for the other three holes.

Tighten the three prong knobs in the approximate position desired for the seat.

Connect the wiring harness to the seat switch.

Adjustments may be required to position the seat in the desired position. Refer to the "Service and Adjustment" section of this manual.

ATTACH CONTROL LEVERS (See Fig. 2)

Using the 9/16" wrench or socket and ratchet, remove the bottom hex bolt and spring washer from the control arm.

Rotate the control lever up until the bolt and spring washer can be placed thru the slot in the bottom of the control lever and threaded back into the control arm.

Center the hex bolt in the slot on the control lever. Using the wrench or ratchet, tighten both the top and bottom hex bolts.

Repeat on opposite side of the mower.

Adjustments may be required to get uniform positioning of the control lever. Refer to the "Service and Adjustment" section of this manual.

NOTE: You may now roll or drive the mower off of the skid. Follow the appropriate instruction below to remove the mower from the skid.

1

2

3

CZ-1

FIGURE 1

1.SEAT PAN

2.KNOBS

3.WIRE HARNESS

1

2

3

4

CZ-2

FIGURE 2

1.CONTROL LEVER

2.CONTROL ARM

3.HEX BOLTS

4.NEUTRAL SLOT

13

Page 13
Image 13
Husqvarna Z4818BIA, 968999250 manual Before Removing Mower from the Skid, Attach Seat See Fig, Attach Control Levers See Fig

968999250, Z4818BIA specifications

The Husqvarna Z4818BIA, model number 968999250, is an advanced zero-turn lawn mower designed for both professional landscapers and enthusiastic homeowners looking for efficiency and control in their lawn maintenance tasks. This model is part of Husqvarna’s renowned line of mowers, known for their reliability, performance, and innovative features.

One of the most notable features of the Z4818BIA is its robust engine. Powered by a commercial-grade Kohler engine, this mower delivers impressive horsepower, enabling it to handle tough mowing conditions with ease. The engine’s reliability ensures that users can depend on consistent performance even during prolonged use.

Equipped with an 18-inch cutting deck, the Z4818BIA provides unmatched maneuverability, allowing users to navigate tight corners and obstacles without sacrificing cut quality. The deck features a three-blade system that produces a clean, even cut, enhancing the overall appearance of the lawn and promoting healthy grass growth.

The Z4818BIA incorporates Husqvarna's patented mowing technology, which optimizes the airflow underneath the deck for superior grass clipping distribution. This feature contributes to a better mulching process and minimizes windrows, ensuring a polished finish with every pass.

The mower's zero-turn capability is another highlight, offering a turning radius of essentially zero degrees. This allows the operator to make sharp turns and efficiently mow around flower beds, trees, and other landscaping features, significantly reducing the time spent mowing.

Comfort is paramount in the design of the Z4818BIA, featuring an ergonomic seat with adjustable armrests to reduce operator fatigue during prolonged use. The user-friendly control panel is intuitively designed, allowing for easy access to all essential functions and adjustable settings.

Safety features also play a significant role in the Z4818BIA's design. The mower includes an automatic blade brake, which stops the blades when the operator lifts off the seat, ensuring maximum safety during operation. Additionally, a reinforced frame enhances durability, allowing it to withstand the rigors of frequent use.

Moreover, the Husqvarna Z4818BIA showcases a strong focus on technology with its easy-start ignition system and maintenance reminders, making upkeep straightforward and hassle-free.

In conclusion, the Husqvarna Z4818BIA, model 968999250, stands out as a versatile, powerful, and user-friendly mower that combines cutting-edge technology with comfort and safety features, making it an excellent choice for those seeking a high-quality zero-turn mower. Its performance, durability, and innovative characteristics ensure that it meets the demanding needs of any lawn care professional or homeowner.