Setting the Boot Drive Sequence

The Boot Drive Sequence section lists boot priorities (1st, 2nd and 3rd) for bootable drives in your computer.

For example, the default value (1st:Hard Disk, 2nd:Floppy Disk, and 3rd:CD-ROM, DVD-ROM) tells the computer to first search for a hard disk. If it finds one present, it boots up from that hard disk. If not, the computer continues to search for a bootable floppy disk in the floppy drive. If it cannot boot up from the floppy disk drive, it continues to search for a bootable CD-ROM in the CD-ROM drive or a bootable DVD-ROM in the DVD-ROM drive.

To set the boot drive sequence, use the cursor up/down (−↓) keys to select a priority level (1st, 2nd, or 3rd); then use the cursor left/right (→←) keys to select the device for that priority level.

Onboard Device Configuration

The parameters in this screen are for advanced users only. You do not need to change the values in this screen because these values are already optimized.

The Onboard Devices Configuration sub-menu assigns resources to basic computer communication hardware.

 

Onboard Device Configuration

 

 

Serial Port

[Enabled] / [Disabled]

Base Address

[3F8h] / [3E8h] / [2E8h]

IRQ

[4] / [11]

Infrared Port

[Disabled] / [Enabled]

Base Address

[2F8h] / [3F8h] / [3E8h]

IRQ

[3] / [10] / [11]

DMA Channel

[3] / [0]

Parallel Port

[Enabled] / [Disabled]

Base Address

[378h] / [278h] / [3BCh]

IRQ

[7] / [5]

Operation Mode

[ECP] / [EPP] / [Bi-directional] /

 

[Standard]

ECP DMA Channel

............. [1] *Note 1

 

 

−↓ = Move highlight bar, →← = Change Setting, F1 = Help

NOTE: 1. This option item is set to 1 if user chooses ECP.

2. This option item should be [---] if user chooses EPP, Bi-directional and Standard mode.

3. When the device is disabled, all the sub-item will be showed with [---].

The following table describes the parameters in this sub-menu. Settings in boldface are the default and suggested parameter settings.

Parameter

Description

Options

 

 

 

Serial Port

Enables or disables the serial port.

Enabled or Disabled

 

When enabled, you can set the base I/O address and

3F8h, 3E8h or 2E8h

 

interrupt request (IRQ) of the serial port.

4 or 11

 

 

 

IrDA Port

Enables or disables the infrared port.

Disabled or Enabled

 

When enabled, you can set the base I/O address,

2F8h, 3E8h or 3F8h

 

interrupt request (IRQ) and direct memory access (DMA)

3, 10 or 11

 

channel of the infrared port.

3 or 0

 

 

 

 

 

Chapter 2

27

Page 32 Page 34
Page 33
Image 33
Acer 49.49C02.001 manual Onboard Device Configuration, Setting the Boot Drive Sequence
Page 32 Page 34

49.49C02.001 specifications

The Acer 49.49C02.001 is a remarkable addition to Acer's lineup of high-performance displays, tailored for gamers and professionals alike. This monitor is characterized by its expansive 49-inch curved screen, which creates an immersive viewing experience that draws the user in. The display features a super ultra-wide 32:9 aspect ratio, providing ample screen real estate for multitasking or fully immersing oneself in gaming.

One of the standout features of the Acer 49.49C02.001 is its QHD resolution, with a 3840 x 1080 pixel configuration. This high resolution ensures that images and videos are rendered with stunning clarity and detail, eliminating any blurriness that can often accompany lower resolution displays. The monitor's VA panel technology contributes to its superior contrast ratios, providing vivid colors and deep blacks that enhance the overall viewing experience.

For gamers, the Acer 49.49C02.001 integrates a 144Hz refresh rate, which is essential for achieving smooth gameplay. The high refresh rate minimizes motion blur and provides a seamless visual experience during fast-paced action, making it an ideal choice for first-person shooters and racing games. Additionally, the monitor supports AMD FreeSync technology, which synchronizes the refresh rate of the display with the graphics card, reducing screen tearing and stuttering during gameplay.

In terms of connectivity, the monitor is equipped with multiple input options, including HDMI and DisplayPort, allowing for easy connections to various devices such as gaming consoles and PCs. The inclusion of USB ports also facilitates the connection of peripherals, ensuring that users have everything they need at their fingertips.

The ergonomic design of the Acer 49.49C02.001 is another significant highlight. With height and tilt adjustments, users can customize the monitor's position for optimal comfort during long hours of use. The sleek and modern design complements any setup, whether for gaming, work, or entertainment.

Moreover, the monitor comes with Acer's BlueLightShield and Flickerless technologies, which reduce eye strain during extended use. This combination of features and technologies makes the Acer 49.49C02.001 a versatile and powerful display, suitable for a wide range of applications, from gaming marathons to professional graphic design work. Overall, Acer's commitment to quality and innovation is evident in this striking monitor.
Top Page Image Contents