Adding Ports to the Selected Address | Asante Technologies 35160

4.4.2 IP Multicast Forwarding Database Configuration

The Multicast Forwarding Database lists addresses of multicast groups, and assigns them to specific VLANs. It also lists the ports within a VLAN that can receive traffic from the multicast address.

To access the Multicast FDB Configuration Menu, type c in the Configuration Menu to display the IP Multicast Traffic Management Menu, and then type m. A screen similar to the following will appear:

IntraCore	35160-T IP Multicast FDB Configuration Menu					VID: [01]
IP Multicast Address: <none>
Created By: <none>
Group Member Info: [ s: Static, d: Dynamic, +: Vlan, -: Not Member ]
	Port List	1	8	9	16
		========		========
		++++++++		++++++++
<Cmd>	<Description>
o	Add/Delete Ports			Addr
i	Insert Multicast IP			Addr
r	Remove Multicast IP			Addr
q	Return to previous menu
root>			P)rev VLAN		Select A)ddr Nex)t Addr Prev) Addr
S)elect VLAN N)ext VLAN			P)rev VLAN		Select A)ddr Nex)t Addr Prev) Addr

Use the commands at the bottom of the menu to select a VLAN or Multicast Group address.

Adding Ports to the Selected Address

To add or delete ports belonging to the multicast group:

1.Select the VLAN that contains the ports and the address. Type s and enter the VID of the selected VLAN.

2.Select the Multicast Group address. Type a and enter the multicast IP address.

3.Type o and follow the instructions.

Inserting a Multicast Group Address

Inserting an address adds that address to the list of Multicast Groups for the current VLAN. The addresses begin 01:00:5e. The remaining 24 bits are the lowest 24 bits of the IP multicast address.

1.Select the VLAN to be assigned the new address. Type s and enter the VID of the selected VLAN.

2.Type i and follow the instructions to add the new address.

Removing a Multicast Group Address

1.Select a VLAN from which the address will be removed. Type s and enter the VID of the selected VLAN.

2.Type r and follow the instructions to remove the address.

63

Image 63

Asante Technologies 35160 user manual IP Multicast Forwarding Database Configuration, Adding Ports to the Selected Address

Contents

IntraCore 35160 Series Quick Start Guide IntraCore 35160 Series Layer 2 Gigabit Switches User’s Manual Table of Contents Page Introduction Features SwitchCore CXE2010 Package ContentsLEDs 2 IC35160-G 1 IC35160-T Front and Back Panel Descriptions Management and Configuration Console Interface Web-Based InterfaceSnmp Management Recommended Installation Tools Hardware Installation and SetupInstallation Overview Safety Overview Cooling and Airflow Installation into an Equipment RackPower Requirements Environmental Requirements Gbic Interfaces Installing a Gbic Gbic Care and Handling Installing the Optional Emergency Power SupplyConnecting Power Removing a Gbic 1 10/100/1000BaseT Ports Cabling Procedures Connecting to the Network Setup Gigabit Ethernet Ports Cabling ProceduresConnecting to a Console Connecting Via Telnet Connecting Via the Web Browser IP Assignment Changing the Password Simple Network Management Protocol Snmp Exiting a Submenu ConfigurationAccessing a Submenu Logging General Information Configuration Menu Changing System Administration Info Administration Configuration System IP Configuration Port ConfigurationChanging System IP Information Page Enabling or Disabling a Port Advanced Port Configuration Enabling or Disabling 802.3x Flow Control Setting Port Class of ServiceSetting Port Default Priority Setting Port Maximum Packet Length Global Port Configuration Unicast Forwarding Database Configuration Displaying the Forwarding Database Searching for a MAC Address Setting the MAC Address Age-Out TimeSecurity Management Vlan Management Protocol Configuration Snmp ConfigurationChanging Community Strings Adding or Updating a Trap Receiver Enabling Authentication Traps Deleting a Trap Receiver Spanning Tree Protocol STP Configuration Spanning Tree Port Configuration Setting Port Priority and Path CostEnabling and Disabling STP Trunk Group Configuration QoS Priority Queue Management Defining the Priority ListAssigning Packets to Priority Queues Example User Interface Configuration Setting Console UI Time-out PeriodSetting SSH/Telnet UI Time-out Change Password Adding or Deleting an Access HostEnabling or Disabling SSH and Telnet Access Control System UtilitiesEnabling or Disabling the Web Server Port Mirroring Enabling or Disabling System Port MirroringAdding or Deleting a Monitor Port System Reset Resetting the SwitchSystem Clock System Log Scheduling a System Reset Clearing the System Log Bootstrap Configuration Tftp File Transfers Ping Utility Statistics Advanced Management Snmp and Rmon ManagementRmon Management Viewing a List of Duplicated IP Addresses Duplicated IP Detection and TrapEnabling and Disabling Duplicated IP Detection Enabling and Disabling Duplicated IP Trap Enabling and Disabling Station Movement Trap Configuring Port Security Configuring Port Lock and Intruder Lock Configuring Port New Node Detection Trap Resetting Security to Defaults Port-based Network Access ControlConfiguring Security Level 2 or Level Setting the Intruder TrapPage Name Description Port Control Settings Setting Timers Setting Radius Parameters Radius Server IPServer Port Vlan Specifications for the IntraCore 35160 Series Other Vlan Features of the switchVlan Management Creating a Vlan Configuring Static Vlan Groups Advanced Static Vlan Configuration Adding and Deleting VLANs from the Port Configuring Vlan Port AttributesSetting the Port Vlan ID Configuring Port Receive Frame Type Displaying a Summary of Vlan Groups Setting Port Type Multicast Addresses Resetting Vlan Configuration to DefaultsIP Multicast Traffic Management Displaying a Vlan Port Summary Configuring IP Multicast Traffic Management Igmp SnoopingEnabling and Disabling Igmp Snooping Displaying a Summary of Group Addresses Advanced Igmp Configuration Removing a Multicast Group Address IP Multicast Forwarding Database ConfigurationAdding Ports to the Selected Address Inserting a Multicast Group Address Web-Based Management Accessing with a Web Browser Front Panel Button Genl Info General Information ButtonManagement Buttons Port Config Port Configuration Button Span Tree Spanning Tree Button Addr Address Table Button Snmp Button Vlan Configuration Vlan ButtonVlan Group Create Acceptable Frame Type Port ConfigurationSet Port Type Port Vlan ID Pvid Tag/Untag Port Egress Type Trunking ButtonSecurity Button Port Ingress FilteringPage Snmp Management Snmp Management OperationsSnmp Protocol Community Name and Security MIB TreeName Space Path MIB Groups Supported Vlan ID and Tagged Frames Switching ConceptsVLANs Port-Based VLANs Spanning Tree Parameters Spanning Tree ProtocolPort Vlan ID How It Works Spanning Tree Port Configuration Full Duplex, Flow Control, and Auto-negotiationFull Duplex Auto-Negotiation Flow Control Problem Possible Solutions Appendix A. Troubleshooting Appendix B. Features and Specifications SpecificationsPhysical Characteristics Technical Support and Warranty Environmental RangeStandards Compliance Appendix C. FCC Compliance and Warranty Statements FCC Compliance Statement Important Safety InstructionsIntraCare Warranty Statement Page Appendix D. Console Port Pin Outs Pin Number Signal Name Appendix E. Online Warranty Registration Loading Software Locally Appendix F. BootP ConfigurationBootstrap Configuration Image Banks Loading Software Remotely BOOTP-TFTP