5.7.2 Port Configuration

To configure the VLAN ports, click on the VLAN Ports link at the top of the VLAN Groups page.

Click on the port number to go to the VLAN Port configuration page, as shown on the following screen.

Here, the user can set the port type, assign a port VLAN ID, add or delete VLANs from the port, select acceptable frame types, enable port ingress filtering. Click Apply Changes when finished. Restart the switch for the changes to take effect.

Set Port Type

Select IEEE 802.1Q Trunk, Asanté Trunk, or Normal from the drop-down menu.

Port VLAN ID (PVID)

Enter the PVID. See Chapter 4 Advanced Management for more information.

Acceptable Frame Type

Select the frame-type from the drop-down menu that the port will accept: All Frames or VLAN-Tagged Frames Only.

70

Page 70
Image 70
Asante Technologies 35160 user manual Port Configuration, Set Port Type, Port Vlan ID Pvid, Acceptable Frame Type