Basic Functions
Listening to Radio
Using buttons on the Remote Control
1.Press the FUNCTION button to select FM.
2.Tune in to the desired station.
•Automatic Tuning 1 : Press the STOP button to select PRE 01 and then press TUNING (
) buttons to select the preset station.
•Automatic Tuning 2 : Press the STOP button to select MANUAL and then press and hold
the TUNING ( ) button to automatically search for active broadcasting stations.
•Manual Tuning : Press the STOP button to select MANUAL and then briefly press the
TUNING ( ) button to increase or decrease the frequency incrementally.
Using buttons on the product
1.Press the F( 
) button to select FM .
2.Select a broadcast station.
•Automatic Tuning 1 : Press the STOP ( ) button to select PRESET and then press the
#$ buttons to select the preset station.
•Automatic Tuning 2 : Press the STOP ( ) button to select MANUAL and then press and hold the # $ buttons to automatically search the band.
•Manual Tuning : Press the STOP ( ) button to select MANUAL and then press the # $ buttons to tune in to a lower or higher frequency.
Setting Mono/Stereo
Press the MO/ST button.
• Each time the button is pressed, the sound switches between STEREO and MONO.
•In a poor reception area, select MONO for a clear, interference-free broadcast.
✎NOTE
This applies only when listening to an FM station.
Presetting Stations
Example : Presetting FM 89.10 in the memory
1. Press the FUNCTION button to select FM. 2. Press the STOP ( ) button on the top panel to
select <MANUAL> mode.
3. Press the # $ button on the top panel to
select <89.10>.
4. Press the ENTER button.
• Number flashes on the display.
5. Press the # $ buttons on the top panel to
select preset number.
• You can select between 1 and 15 presets.
6. Press the ENTER button again.
• Press the ENTER button before number disappears from the display.
• Number disappears from the display and the station is stored in memory.
7. To preset another station, repeat steps 2 to 6.
• | To tune in to a preset station, press the # $ on | |
| the top panel to select a channel. | |
✎NOTE |
| |
| You can also use TUNING ( | ) buttons on the remote |
control instead of # or $ buttons in step 3,5,7 .
About RDS broadcasting(optional)
Using the RDS (Radio Data System) to
receive FM stations
RDS allows FM stations to send an additional signal along with their regular program signals.
For example, the stations send their station names, as well as information about what type of program they broadcast, such as sports or music, etc.
When tuned to an FM station which provides the RDS service, the RDS indicator lights up on the display.
Description on RDS function
•PTY (Program Type) : Displays the type of programme currently being broadcast.
•PS NAME (Program Service Name) : Indicates the name of broadcasting station and is composed of 8 characters.
•RT (Radio Text) : Decodes the text broadcast by a station (if any) and is composed of maximum 64 characters.